Hi ,
When we create material using "Create with Template" option. I understand Material general data is copied and only when specific organization level is mentioned in template the corresponding data is copied. Which denotes that not all data from source material is copied to target new material .
But when it comes to classification , by default are the class types and characteristic values copied too ? Is this feature supported in MDG 6.1 Material ?
Kind Regards,
Shruthi
Hi Masters.
I am Working with scenarie MDM--PI--MM Master data Vendors,
ON ECC 6.0 has a two idocs serialized ADRMAS and CREMAS both with status 75
an JOB is execute with next programs RSEINBQUEUE_PARTNER and RSEINBQUEUE so ARDMAS finished ok status 53 but CREMAS finished with status 51
SAPMF02K 0111 ADDR1_DATA-REGION the data is region but in CREMAS is it '/' because these data comes in ADRMAS
do you think is neccesary active an Badi ?
I before reviewed the note 1052964 and I did not find something different.
thanks in advance.
Hi,
Im using Tx SE16 to download several tables that I need to work with, is there any way to download table's field list.
is there a way to switch the table header between table field names and user "readeable" field names?
Thx!
regards
Hi,
I have few questions on replication of Hirarchies & groups:
2. I am creating PCTR via single processing & then release of Edition is replicating the PCTR. However, i am the using the collective Processing for creating PCTRG & PCTRH along with the assignment of PCTR to it. But still my replication is not happening for PCTRG. This is the process that I am following.Is this the correct approach or I should go for addition of Custom Profit Center Group attribute right from the Data Modelling- UI Config -SMT Mapping?
3. What is the Idoc for Hierarchy which I can configure?
4. Can We replicate Hierarchy through IDOC?If Yes then How? If not then what is the alternative way to do it?
I would really appreciate you if you could provide me an answer or a hint.
Best Regards,
Kaustubh
Hi Experts,
We are using MDM 7.1 SP09 and we are facing an issue of workflow getting triggered when records are added or replaced in Mask..
ie whenever i am adding or replacing some records in mask workflow is triggered for most of the records ....IF i check the Workflow tab it will show all the steps maintained for that particular Workflow adn then gets deleted automatically...and strange thing is it is happening to a single user id/role and for other role this does not happen
Can anyone please help me sorting out this issue..
Regards
Nitin
Hi Techies,
Please help me out for the below scenario:
I would need to send an email notification when the Data replication is either Success or failure. When the Data replication is success, I would need to send an e mail to one team. when the Data replication is failed, an email to be sent to different team.
Also, if there is a difference in the approaches with SOA or IDOC for Replication, it would be of a great help if you can let me know the difference as well for data replication and as well as Email notifications.
Thanks,
Anusha
Hi Experts
We are getting the following errors when we want to activate MDG 7.0 components on SAP ERP EHP 6. Any ideas?
Field ACTSS in table /MDGBPX/_SD_BP_PD_BP_VENGEN is specified twice. Please check
Field REF_BPVEN in table /MDGBPX/_SD_BP_PD_BP_VENGEN is specified twice. Please check
Field REF_VNGEN in table /MDGBPX/_SD_BP_PD_BP_VENGEN is specified twice. Please check
Field REGSS in table /MDGBPX/_SD_BP_PD_BP_VENGEN is specified twice. Please check
Field VEN_FITYP in table /MDGBPX/_SD_BP_PD_BP_VENGEN is specified twice. Please check
*** Activate objects at level 2
Field ACTSS in table /MDGBPX/_S_BP_PD_BP_VENGEN is specified twice. Please check
Field ASSGNM_ID in table /MDGBPX/_S_BP_PD_BP_VENGEN is specified twice. Please check
Field REGSS in table /MDGBPX/_S_BP_PD_BP_VENGEN is specified twice. Please check
Field VEN_FITYP in table /MDGBPX/_S_BP_PD_BP_VENGEN is specified twice. Please check
Field VEN_KFBUS in table /MDGBPX/_S_BP_PD_BP_VENGEN is specified twice. Please check
Field VEN_KFIND in table /MDGBPX/_S_BP_PD_BP_VENGEN is specified twice. Please check
Field VEN_KFREP in table /MDGBPX/_S_BP_PD_BP_VENGEN is specified twice. Please check
Table /MDGBPX/_SD_BP_PD_BP_VENGEN could not be activated
Table /MDGBPX/_S_BP_PD_BP_VENGEN could not be activated
Regards
Danie
Hi Experts,
I have written code to create change request and start flow foe one of our scenario. I am successful in doing that.
The problem that I am facing is when I chose the CR in MDG UI, it opens up and on further selection of entity type, I get an error saying that "In this process navigation was not allowed". On displaying help(for the error ), I get 'Single object maintainance was not allowed. Due to this error, I am not able to look at the data.I can see data in inactive table. However, on completion of WF, I can see active data. The only problem here is I cannot see the data on the UI when CR is created. I have experimented with 'Single object' and 'object required' check box in change request type.
I am attaching file for reference.
Please suggest
Thanks and regards
Abhimanyu
hi all,
I have been trying to replicate material master data to target system through DRF using tcode DRFOUT. But it is giving an error that 'enterprise search connector is not available' . I cannot understand why it needs to use enterprise search in data replication. MDG material and material connectors are active in ESH_COCKPIT.
Thanks in advance
Hi
Is it possible to downport joint venture functionality in MDG for Data Model 0G without putting efforts for extention and codification as per below
[PDF]Extending the Data Model by New Fields in MDG-F - SAP
and particullarly 
Hi All,
In DRFIMG transaction.. (data replication framework) when i am using DEFINE OUTBOUND INTERFACE MODELS ,
after filling details in 3 steps in that, When i am clicking on generate Interface model it was giving error like ..
Please solve the issue .. .. The interface model is not creating in particular of function group.
followed docs and links..
Hi Experts,
I build a custom object Location with all the UI and workflow modeling, but in NWBC my change request type is not displaying.
Note:- I checked Data Model, UI as well as my change request, all look fines.
Can anyone please let me know whether I missing anything.
Regards
Prateek Agarwal
Hi Experts,
We are using MDM 7.1 SP09 and we are facing an issue of workflow getting triggered when records are added or replaced in Mask..
ie whenever i am adding or replacing some records in mask workflow is triggered for most of the records ....IF i check the Workflow tab it will show all the steps maintained for that particular Workflow adn then gets deleted automatically...and strange thing is it is happening to a single user id/role and for other role this does not happen
Can anyone please help me sorting out this issue..
Regards
Nitin
Dear all,
1. we would like to set Enterprise Search (Fuzzy) as the standard
Search in der ERP Vendor UI Search Form of the MDG-S 6.1 Vendor UI. When a user is opening the ERP Vendor UI Search Form then Enterprise Search (Fuzzy) should be displayed as a standard selection from the available searches drop-down list. How
can this be achieved ?
2. In Enterprise Search
Fuzzy there are only a few search fields selectable (Search Term, BP
ID, Organisation Name 3, Organisation Name 2, Search Term 1 and Search
Term 2) after we upgrade installed from 6.0 to 6.1. We would need to have more fields selectable: At least: BP ID,
Street, Postal Code, Name 1, Search Term 1, City and Country). How can
this be configured ?
3. The mentioned fields in the second last sentence of point 2. should
be displayed for the user everytime any user is entering the Vendor UI
ERP-Vendor search. Meaning user should not need to select a saved search but
right away sees a particular number of fields he can search. How can this be configured ?
Thanks.
Regards,
Michael
Dear Experts.
I am trying to expand or collapse the section in the UI screen and I have tried all possible configurations to enable it. Nothing seems working.
Can anyone please help for the issue being faced for expansion/collapse of section on UI screen without using any code.
Example : Addresses, Bank Accounts, Identification Numbers, Tax Numbers, Industries.
Thanks,
Shankar
Hi ,
As mentioned in the SAP delivered document for MDG 7.0 Material config, I have created connector templates MATERIAL & MDG_MATERIAL. Indexing is scheduled successfully and status shows active.
Consistency check for MATERIAL is active, however consistency check for MDG_MATERIAL is in warning and I have all the authorization required (no SU53 errors).
When creating a CR or when searching for Materials, I get the following error - " Search Object Connector MDG_MATERIAL not found'.
Even the report ESH_TEST_SEARCH for MDG_MATERIAL shows warning message.
Please provide any suggestions or pointers to resolve the error.
Regards,
Archana Balliwar
MDM sizing docs gives CPU in SAPS. How do i convert SAPS to number of CPUs in a AIX environment?
Hi Techies,
Please help me out for the below scenario:
I would need to send an email notification when the Data replication is either Success or failure. When the Data replication is success, I would need to send an e mail to one team. when the Data replication is failed, an email to be sent to different team.
Also, if there is a difference in the approaches with SOA or IDOC for Replication, it would be of a great help if you can let me know the difference as well for data replication and as well as Email notifications.
Thanks,
Anusha
Hi MDG Gurus,
We are implementing MDG-S on MDG 7.0 on SAP ECC 6.0 ehp6 for a client in a co-deployed scenario.
Actually I have a small confusion in designing the workflow for this:
1) Can we only use a rule-based workflow for MDG supplier workflow configuration like we use for MDG-Material ? If yes, then after the activation of BC-set "CA-MDG-APP-SUP_DE_VC_USMD110_C" can we ensure that the BRF+ decision table steps will be imported successfully or do we need to perform some other configuration?
2) But, If we use the conventional method as given in the link Set Up the Workflow - Master Data Governance for Supplier - SAP Library,
then can we achieve success in the successful configuration of the workflow OR do we need to use both the methods as given in the guide.
Please let me know which is the preferred method which we can use for configuration of supplier workflow and please provide some document having screenshots or step by step guide to configure the Supplier workflow using these 2 methods.
Thank you.
Regards,
Satyam
Hi All,
While attempting to use the MDM UI App for configuration we get a Login Error for the selected Repository.
SAPNote 1650896 - SRM-MDM “Login Failed” error describes the exact issue however I don't believe we have an issue with version mismatch.
I know the Username/password is correct for the respository because I can load the Repository without issue in the console.
UI App Url: http://localhost:50000/webdynpro/dispatcher/sap.com/tc~mdm~srmcat~uisearch/MDM_SRM_UI_App
Utilities connection test Url:
http://localhost:50000/webdynpro/dispatcher/sap.com/tc~mdm~srmcat~uiutil/Utilities
results:
Checking MDM server ports...
Connection ok (port 59950, Time = 2 ms)
!--------------------------------------!
Retrieving MDM JAVA API Version
Admin Version = 7.1.07.101 [Interface CRC=0x7d50b0cf]
Build Version = 7.1.07.166
Content Version = 7.1.07.101 [Interface CRC=???]
Meta Version \t= 7.1.07.101 [Interface CRC=0x3a0a3732]
!======================================!
Building up connection to MDM server 10.60.4.192
Retreiving MDM server version...
Version = Version 7.1 (7.1.07.166 Win64)
!======================================!
Retreiving mounted repositories...
-> SRM_MDM_SRS_CATALOG_SLAVE1 (MDS.WORLD/ORCL)
-> SRM_MDM_SRS_CATALOG_SLAVE (MDS.WORLD/ORCL)
-> SRM_MDM_SRS_CATALOG (MDS.WORLD/ORCL)
-> SRMMDMCAT30_SP05_00.a2a (MDS.WORLD/ORCL)
Connection test was successful
Installed versions:
MDM_CONNECTOR - 710.700.7.1
MDM_JAVA_API - 710.7.166
SRM_MDM_CAT - 7.02.0.0
Can you please advise?
thanks in advance,
colm